Build Price (MSRP)
Please note, your Volvo Electric machine comes packaged with a Level 1 and 2 machine charging cable as standard equipment. You can charge these machines using a standard 120v wall outlet or a 240v NEMA 14-50 (50 AMP) circuit. The below chargers are only optional.
DC (Direct Current) Fast Chargers drastically reduce charge times for electric equipment. Volvo CE and Benning have partnered to... Read More
DC (Direct Current) Fast Chargers drastically reduce charge times for electric equipment. Volvo CE and Benning have partnered to... Read More
DC (Direct Current) Fast Chargers drastically reduce charge times for electric equipment. Volvo CE and Benning have partnered to... Read More
Portable e-generator with 5.6kWh capacity Read More
Seat slides left or right with propulsion and vibration controls on either side of the operator. Read More
Additional Urethane scraper for inboard drum surface. Read More
*Manufacturer's Suggested Retail Price (MSRP)
Manufacturer's Suggested Retail Price is based on the above machine specifications, and might change depending on added local market specific options. The Manufacturer's Suggested Retail Price is a non-binding recommendation from Volvo CE to its dealers. Volvo CE dealers can set their own retail prices, which may be higher or lower than the Manufacturer's Suggested Retail Price.
DC (Direct Current) Fast Chargers drastically reduce charge times for electric equipment. Volvo CE and Benning have partnered to development fast chargers specifically for 48 V lithium-ion battery Volvo branded electric compact machines. Designed for the US market, this 48VDC standard fast charger requires a 480VAC 3-phase input and produces 240Amp/hours.
DC (Direct Current) Fast Chargers drastically reduce charge times for electric equipment. Volvo CE and Benning have partnered to development fast chargers specifically for 48 V lithium-ion battery Volvo branded electric compact machines. Designed for the Canadian market, this 48VDC standard fast charger requires a 600VAC 3-phase input and produces 240Amp/hours.
DC (Direct Current) Fast Chargers drastically reduce charge times for electric equipment. Volvo CE and Benning have partnered to development fast chargers specifically for 48 V lithium-ion battery Volvo branded electric compact machines. Designed for the US market, this 48VDC high current fast charger requires a 480VAC 3-phase input and produces 360 Amp/hours to help expedite multi-unit charging.
Mobile e-generator with 80kWh capacity
Portable e-generator with 5.6kWh capacity
Solar charger and 43 kWh battery
In order to improve visibility, comfort, and efficiency for the operator, the sliding seat option allows the operator to position themselves farther to the outside of the machine frame to make it easier to observe the critical drum edge. The propulsion control lever with integrated vibration actuation is replicated on the left and right sides of the operators seat to suit the ergonomic preference of any operator.
Alternative drum to the standard 1200mm (47") drum.
This option adds a second Urethane scraper for each drum, sized for the 1000mm(39") drum, mounted inboard on the machine to provide additional cleaning of the drum surface and even distribution of water.
This option adds a second Urethane scraper for each drum, sized for the 1200mm(47") drum, mounted inboard on the machine to provide additional cleaning of the drum surface and even distribution of water.
Sliding Seat with Single Drive Lever |
Drum Installation Set 1200mm (47.2") |
Drum Offset Articulation Joint (Mechanical) |
Foldable ROPS |
Back up alarm |
Worklights ROPS front (2) & rear (2) |
Strobe Light |
DC Fast Charge Installation |
Charging Kit |
On Board Charger - Double |
English Manual |
Caretrack No Satellite |
Pictogram Decals |
Additional Document Box |
Frame lifetime guarantee |