The perfect match

General purpose bucket - Universal cut

General purpose buckets are designed to be used in a large variety of ground conditions for all digging jobs. Handles materials like soil, clay, sand and dirt as well as tougher grounds with gravel and stones. To meet any work conditions or applications, Volvo buckets has a profile and a radius design that is optimized for Volvo machines in capacity, filling factor and digging force for highest productivity and profitability.

General purpose bucket GPX - Aggressive cut

This bucket is intended for general use in most digging applications. Handles materials like soil, clay, sand and dirt as well as grounds with more rocky content with gravel, stones and small to medium rocks. High tensile steel is used in high wear areas like the front and side cutting edges and in other critical areas.

Fixed Ditching bucket

Ditching buckets are designed for work like landscaping, cleaning ditches, grading, finishing and back filling. Features include drain holes to reduce weight and ease material release during operation, internal reinforcing plates gives added strength and rigidity to the bucket as well as bolt on edge that is reversible.

Tiltable Ditching bucket

The Tiltable Ditching bucket is a flexible solution for ditch maintenance, landscaping and slope shaping. With a 45° degree tilt on both sides, the ditching bucket provides excellent precision – the perfect choice when a clean, smooth grade is required.

Grading bucket TGX

The grading bucket has been optimized for use with a tiltrotator and is designed for accurate and precise digging, landscaping, finishing, cleaning ditches, grading, back filling and sloping jobs. Angled corners allow the bucket to work in close proximity to objects. The bucket easily rotates when full without spillage of material. High tensile steel is used in high wear areas like the front and side cutting edges and in other critical areas.

Cable bucket CAX - Aggressive cut

Designed for work in narrow trenches and commonly used when laying cables. The bucket's long profile allows it to work close to pipes, cables and other material. High tensile steel is used in high wear areas like the front and side cutting edges and in other critical areas.

General purpose bucket GPX - Aggressive cut

This bucket is intended for digging and moving loose material such as sand, clay, dirt and gravel. Features include side and bottom wear protection and Volvo general purpose tooth system fitted as standard (GPE).

Cable bucket CAX - Aggressive Cut

Designed for work in narrow trenches with a long profile that allows it to work close to pipes and cables. Features include extended cutting edge, narrow design and side and bottom wear protection.

General purpose bucket - Straight cut

V2 buckets for digging and re-handling of soft-to-medium materials, such as dirt, loam, sand, and loose clay soils with low-wear characteristics and limited rock content.