Loader Buckets

Rehandling Flat Floor bucket

The best choice for handling, stockpiling and loading processed material, such as sand, gravel and aggregate. Optimized for soft underfoot conditions. Maximize traction and break-out force, while maintaining a clean and level work area for unbeatable productivity and efficiency. Available with optional bolt-on edge.

General purpose bucket - Standard

The best all-round bucket. When fitted with bolt-on edges it works well handling loose material and aggregates in both short cycle and load and carry operations. When fitted with welded teeth options and segments, it is the best choice for loading easily broken material from banks.

General purpose bucket - Heavy duty

The best choice for all-round efficiency. The bucket is primarily intended for use in low-impact operations, with moderately abrasive materials such as dirt, loam, gravel, and clay. Reflective stickers boost visibility for quick and easy filling. Reinforced with wear resistant steel HB400 and HB500. Can be equipped with bolt-on edges, welded teeth options and segments.

General purpose bucket - Flat floor

Optimized for soft underfoot conditions and earth moving applications such as landscaping, stripping topsoil and grading. The smart bucket design offers maximum traction and break-out force, while maintaining a clean and level work area. Volvo recommends fitting your bucket with flush adapters and GP points.

Grading bucket

The grading bucket has a long flat bottom. It is intended for earthmoving work such as topsoil stripping, small scale dozing, landscaping and leveling of fill. An edge is provided on the back side for grading when the machine is reversed.

Rock bucket - Spade Nose

The best choice for breaking-out hard and stony material and shot rock. Recommended to be fitted with 1 1/2 leg adapters, teeth (GP or AM) and segments. For gravel, fine shot rock and ore, it can be fitted with a bolt-on edge or teeth.

Rock bucket – Block handler

Engineered to deliver outstanding durability in quarry environments, this bucket is optimized for carrying blocks and loading overburden. High tensile steel and wear resistant parts are positioned in critical areas.

Slag bucket

This bucket features extensive reinforcements throughout, ensuring it can withstand the extremely high temperatures and abrasion commonly found in hot slag applications. Using the Volvo Slag bucket as a starting point, through our Custom Built Attachments program we can work with you to tailor the optimum bucket specification for your operation.

Light material bucket - Low density

High capacity light material bucket for efficient handling of low density material such as compost, refuse, coal etc.

Light material bucket - Very low density

High capacity light material bucket for efficient handling of very low density material such as wood chips, grain etc.

High tip bucket - Center cylinders

The Volvo high tip light material bucket has high capacity for handling low density materials such as compost, refuse, coal etc. The high tip bucket features an increased dump height over standard light material buckets as it is hydraulically lifted from a built-in frame.

High-tip bucket – Side-mounted cylinders

Specifically intended for waste and recycling applications, this bucket provides the extra height required to reach high load receivers. The side-mounted horizontal cylinders enable smooth tilting and easy dumping, while perfectly protected hydraulic hoses contribute to long-lasting performance. Compatible with all boom types and Volvo interfaces. Standard bolt-on edge.

Refuse bucket

Volvo refuse buckets are heavy-duty light material buckets intended for use in recycling applications like handling refuse material, household garbage and other low density waste material.

Refuse Tamping

The bucket is optimized for waste handling at a transfer station. With an extra-long floor and heavy-duty design, this bucket is ideal in push floor operations for both pushing the material to and packing (tamping) it in the container.

Refuse bucket - Tamping with clamp arms

The bucket is optimized for waste handling at a transfer station. With an extra-long floor and heavy-duty design, this bucket is ideal in push floor operations for both pushing the material to and packing (tamping) it in the container. The clamp arms enable the operator to push approximately 25% more material per load as well as remove material from the truck or container. A third hydraulic function is required to operate the bucket.

Rehandling Bucket

The perfect fit for handling, stockpiling and loading processed material. Optimized for applications requiring moderate break-out force. Achieve the highest possible machine performance in both short cycle and load and carry applications. Available with optional bolt-on edge.