Volvo Construction Equipment’s DD25B double drum compactor is powered by a durable and fuel-efficient three-cylinder engine that meets strict Tier 4 Final/Stage IV emissions regulations without the cost and complexity of an after-treatment system. The 25 hp Volvo D1.7A engine is perfectly matched to the compactor’s hydraulic system and delivers high performance with a 7% reduction in fuel consumption.
The DD25B offers high frequency compaction, a choice of 3300 or 4000 vpm depending on application, with increased productivity, by allowing the operator to travel at higher speeds while still maintaining optimum impact spacing. Safety and precision are enhanced by the angled drum mounts, sloping hood design and optimally positioned sliding seat, which provide the operator with a 360° view of the drum edges and surroundings when the compactor is rolling forwards and in reverse. The machined drums with chamfered edges are perfectly cylindrical, producing a smooth mark-free mat while the advanced eccentric system ensures a powerful performance, equivalent to machines fitted with a significantly larger engine.
The advanced design of the DD25B’s pressurized water system facilitates smooth, even compaction with maximum machine uptime. The reliable, rust-proof system delivers a consistent flow of water to the front and rear drum surfaces of the compactor to eliminate asphalt pick-up, thereby ensuring a high quality finish and protecting the machine from damage. The fine filters behind each of the eight spray nozzles prevent clogging and ensure correct fan spray coverage. The industry-leading water tank capacity minimizes downtime due to refilling while a gauge, easily visible from the seat, allows the operator to accurately monitor the water tank level and effectively plan service breaks. The operator also has the option to adjust the interval between sprays to conserve water when required and reduce filling downtime. When servicing the compactor, the water nozzles can be quickly and easily removed without the need for any tools to get the machine back on the job as quickly as possible.
The Volvo DD25B is one of the most robust compactors on the market with minimal maintenance requirements. The front and rear drum wipers are made of durable urethane, to increase effectiveness and service life while the eccentric bearings, built to tolerate high temperatures and rotation speeds, are lubricated for life. Auto-start vibration engages automatically when the FSR lever is moved out of neutral and disengages when the lever is in stop position to eliminate accidental damage to the mat.
Daily inspections are easy to carry out thanks to the lightweight hood which tilts forward with the aid of two gas struts. This provides wide access to the engine and hydraulic components of the compactor at ground level. As with all Volvo construction equipment, dealer support is provided as standard, offering a ready supply of expert advice and genuine Volvo parts that are perfectly matched to the machine.
Head of Brand, Marketing and Corporate Communication
Regions Asia and China
Volvo Construction Equipment
E-mail: tiffany.cheng@volvo.com
Head of Strategic Communications
Volvo Construction Equipment
Email: asa.alstrom@volvo.com
DD25B | ||||
Machine weights (w/ ROPS) | Narrow Drum | Wide Drum | ||
Operating weight | 2515 kg | 5545 lb | 2620 kg | 5776 lb |
Drum width | 1000 mm | 39.4 in | 1200 mm | 47.2 in |
Drum diameter | 700 mm | 2,7.5 | 700 mm | 2,7.5 |
Vibration frequency | 55/66.7 Hz | 3300/4000 vpm | 55/66.7 Hz | 3300/4000 vpm |
Nominal amplitude | 0.54 mm | 0.0210 in | 0.50 mm | 0.0,197 |
High centrifugal force | 37.5 kN | 8430 lb | 40.6 kN | 9127 lb |
Low centrifugal force | 25.5 kN | 5732 lb | 27.7 lb | 6227 lb |
Engine make/model | Volvo D1.7A | |||
Exhaust emission | Tier 4 Final/Stage IV | |||
Engine type | 3-cylinder diesel | |||
Rated power at installed speed | 18.4 kW/ 25 hp @ 2200 rpm |